RIBstore

Requires 50mm hole in transom. As used on many RIBs Kit contains  1 x 42mm drain socket (threaded through hull piece with nut) 1 x non-return ...

Whether you have a small SIB or large RIB, you can clean and protect your inflatable PVC or hypalon tubes using professional-quality cleaning and v...

Whether you have a small or large RIB, with PVC or hypalon tubes, this RIB valet kit will have your boat looking great. Contains: Boat Wash Pro...

Rowlock Hinge Bar locates into hole in plastic part of T Piece Rowlock with thread. Length is typically 86mm and diameter is 17.5mm Can be cut ...

Rubber boot for original metal and nylon military valves as fitted to Achilles, Riken and older US sourced Avon RIBs and inflatable boats. Has a s...

Low profile rubbing strake made from tough EPDM for bonding to RIB collars or tubes to protect from impact abrasion damage. Best suited for hypa...

Screw On Rowlock Cap and String Fits Honwaves, Lodestars, Plastimo, Quicksilver, Suzumar, Waveline, Wetline, XM & numerous far eastern Inflat...

Screw-in valve as fitted to early Plastimo, Quicksilver, Maxxon and Yam. Also fits Avon Typhoons - typically these boats have blue valves Outsid...

SealSkin is a flexible water-based, flexible, acrylic sealant applied within the inflatable boat collar tube. Great for repairing older inflatable...

Plastic Seam Roller - Clearance item Patches and fittings fixed with a contact adhesives should be rolled to ensure a long lasting airtight bond, ...

Seat Thwart Retaining Plastic  Colour: Mid grey Length: 175mm Width of flange that attaches to the seat: 47mm Width of flange that fits into ...

Solid round filaments tapering from base to tip. For use with emulsion and other water-based paints, stains and compounds. Stainless steel ferrule ...

T Piece Rowlock Pin with thread for Honwave, Lodestars,Plastimo, Quicksilver, Waveline, Suzumar, Wetline & far easternInflatables Overall ...

T Piece Rowlock Pin with thread, Screw on Rowlock Cap & String & Hinge Bar, this is a complete repair kit for Rowlock Block with Pin Dim...

TEAR-AID material is made from an exceptionally tough, matt finish, abrasion resistant, elastomer that resists puncture and tearing. Combined with ...

Teardrop profile shape rubbing strake made from tough EPDM for bonding to RIB collar's or tubes to protect from impact abrasion damage. This strake...

ToobShine RIB Inflatable Boat Cleaner is specially formulated by RIBstore. Our cleaner is suitable for all types of inflatables, dinghies and RIBs,...

As well as kits and retail packs, RIBstore also sell Tear Aid Type A & B off the roll in both 3" (76mm) and 6" (153mm) widths. All widths and ...

Valve key for removing and installing the screw-in male valve body 8 section valves as fitted to Waveline 2009 and 2010+ models & Halkey Robert...

Valve spanner for a range of Bravo valves (2000, 2001 & 2005), Halkey Roberts valves and Valiant/Ceredi Recessed valve. Required when tighten...

Spoil your first love....your boat! Shopping for someone else, but not sure what to give them?Give them the gift of choice with a RIBstore.co.uk gi...

Non Return Drain with diaphragm & drain plug complete for Honwave & Waveline Inflatables 35mm diameter opening Requires 47mm hole in tr...